|
ITEM NO. |
PHOTOS |
DESCRIPTION |
PRICE
USD |
|
IS12B-247 |
 |
46" 3-Jaw Heavy Duty Power Chuck
Stock Number: 012B-247
No. 46" 3-Jaw Power PL. Back
Serial No. N/A
| Specification |
Description |
| Diameter of Chuck: |
46" |
| Number of Jaws: |
3 |
| Thickness of Chuck: |
7" |
| Number of Radial T-Slots: |
9 |
| Size of T-Slots: |
1" |
| Plain Back |
|
| |
|
| No Top Jaws |
|
Equipped With:
Good Condition |
9450.00 |
|
IS12B-276 |
 |
 |
24" Cushman 3-Jaw Power Chuck
Stock Number: 012B-276
Model No. 20 670 24 A15L
| Specification |
Description |
| Two Piece Serrated Jaws without Top Jaws |
|
| Three 3/4" T-Slots |
|
| 6-1/2" Thick Steel Body |
|
| Flame Treated |
|
| A-15 Back |
|
|
5500.00 |
|
IS12B-275 |
 |
 |
24" Cushman 3-Jaw Power Chuck
Stock Number: 012B-275
Model No. 20 670 24 A15L
| Specification |
Description |
| Two Piece Serrated Jaws
without Top Jaws |
|
| Three 3/4" T-Slots |
|
| 6-1/2" Thick Steel Body |
|
| Flame Treated |
|
| A-15 Back |
|
|
6500.00 |
|
IS12B-320 |
 |
 |
21" Cushman Heavy Duty 3-Jaw Power Chuck
Stock Number: 012B-320
No. 21" Power Chuck
Serial No. 20 670 21 A15C
| Specification |
Description |
| Flame Treated |
|
| |
|
| Two-Piece Serrated Jaws
without Top Jaws |
|
| |
|
| Chuck Diameter: |
21" |
| Thickness of Steel Body: |
6-1/2" |
| Power Jaw Movement: |
3/8" |
| Spindle Mount: |
A1-15" |
| Weight of Chuck: |
553 Lbs. |
Equipped With:
Very Good Condition |
3800.00 |
|
IS12B-038 |
 |
 |
18" Heavy Duty 3-Jaw Power Lathe Chuck
Stock Number: 012B-038
Model No. 18" A1-11 Mount
| Specification |
Description |
| Two-Piece Tongue & Groove
Jaws without Top Jaws |
|
| 8 1/2" Thick Chuck Body |
|
| A-11 Back |
|
Equipped With:
*Very Good Condition |
3200.00 |
|
IS12B-041 |
 |
 |
15" Cushman 3-Jaw Power Lathe Chuck
Stock Number: 012B-041
Model No. 15" A1-8 Mount
| Specification |
Description |
| Two Piece Tongue & Grove
Jaws w/ Special Top Jaws |
|
| 4 3/4" Thick Chuck Body |
|
| (3) T-Slots |
|
| A-8 Back |
|
Equipped With:
*Very Good Condition |
3200.00 |
|
IS12B-295 |
 |
 |
12" Power 3-Jaw Lathe Chuck
Stock Number: 012B-295
| Specification |
Description |
| Two Piece Tongue and Groove
with Serrated Bottom without Top Jaws |
|
| |
|
| 1" x 14 Threads Per Inch
Actuating Hole |
|
| Steel Chuck Body: |
4-1/2" Thick |
| (3) T-Slots: |
3/4" |
| Plain Adjust-Tru Back
without Back Plate |
|
|
1100.00 |
|
IS12B-263 |
 |
 |
12" Fuji 3-Jaw Power Lathe Chuck,
Plain Back
Stock Number: 012B-263
Model 12" Plain Back
| Specification |
Description |
| Two Piece serrrated Jaws
w/Soft Top Jaws |
|
| 4" Thick Cast Chuck Body |
|
| Plain Back |
|
|
2100.00 |
|
IS12B-291 |
 |
 |
12" Logan/ Warner & Swasey 3-Jaw Power Lathe
Chuck
Stock Number: 012B-291
Model No. 94945-330-B-12-8
Serial No. W&S: 59869
| Specification |
Description |
| Two Piece Tongue and Groove
Jaws without Top Jaws |
|
| |
|
| 2-1/4" x 12 Threads Per Inch
Actuating Rod |
|
| Cast Chuck Body: |
5" Thick |
| A-8 Back |
|
|
1695.00 |
|
IS12B-321 |
 |
 |
12" Cushman 3-Jaw Power Chuck
Stock Number: 012B-321
No. 20 623 12 A08A
| Specification |
Description |
| Flame Hardened |
|
| |
|
| Two-Piece Tongue & Groove
without Top Jaws |
|
| |
|
| 12" Diameter Chuck |
|
| 4-3/4" Thick Steel Chuck
Body |
|
| (3) 3/4" T-Slots |
|
| 135 Lbs Chuck Weight |
|
| A1-8" Taper Mouting Back |
|
| |
|
| Very Good Condition |
|
|
1995.00 |
|
IS12B-264 |
 |
 |
11" Powerhold 3-Jaw Power Lathe Chuck
Stock Number: 012B-264
Model No. 280 3 A8
Serial No. 8846
| Specification |
Description |
| Two Piece Serrated Jaws
without Top Jaws |
|
| |
|
| Hole Thru Chuck: |
2" |
| Steel Chuck Body: |
6-3/4" Thick |
| A-8 Back |
|
| Approx. Weight: |
136 lbs. |
|
2700.00 |
|
IS12B-300 |
 |
 |
10" Fuji 3-Jaw Power Lathe Chuck
Stock Number: 012B-300
| Specification |
Description |
| Two Piece Serrated Jaws
Without Top Jaws |
|
| |
|
| Steel Chuck Body: |
3-3/4" Thick |
| Plain Back |
|
|
2100.00 |
|
IS12B-282 |
 |
 |
10" Seiki 3-Jaw Power Lathe Chuck
Stock Number: 012B-282
Model No. 91P014
| Specification |
Description |
| Two Piece Tongue and Groove
with Serrated Bottoms and Soft Top Jaws |
|
| |
|
| Steel Chuck Body: |
4-1/2" Thick |
| 1/2" x 10 Threads per Inch
for Actuator |
|
| A-8 Back |
|
|
2100.00 |
|
IS12B-308 |
 |
 |
8" Buck 3-Jaw Power Lathe Chuck
Stock Number: 012B-308
Serial No. 4108
| Specification |
Description |
| Two Piece Tongue and Groove
Jaws without Top Jaws |
|
| |
|
| Steel Chuck Body: |
4" Thick |
| 3/4" x 18 Threads Per Inch
for Actuating |
|
| Adjust-Tru D1-6 Back |
|
|
1695.00 |
|
IS12B-304 |
 |
 |
8-1/2" Buck 3- Jaw Power
Lathe Chuck
Stock Number: 012B-304
|
Specification |
Description |
| Two
Piece Tongue and Groove Jaws with Special Hard Top JawsHard |
|
| |
|
| Steel
Chuck Body: |
3-3/4" Thick |
| 1/2"
x 18 Threads Per Inch For Actuating |
|
|
Adjust-Tru Plain Back |
|
|
1695.00 |
|
IS12B-306 |
 |
 |
8-1/4" Skinner 3-Jaw Power Lathe Chuck
Stock Number: 012B-306
Serial No. 1308 B
| Specification |
Description |
| Two Piece Tongue and Groove
Jaws without Top Jaws |
|
| |
|
| Steel Chuck Body: |
3-3/4" Thick |
| 3-3/4" x 16 Threads Per Inch
For Actuating |
|
| Plain Back |
|
|
1125.00 |
|
IS12B-305 |
 |
 |
8-1/4" Buck 3-Jaw Power Lathe Chuck
Stock Number: 012B-305
Serial No. 4108 N
| Specification |
Description |
| Two Piece Tongue and Groove
Jaws without Top Jaws |
|
| |
|
| Hole Thru Chuck: |
1/2" |
| Aluminum Chuck Body: |
4" Thick |
| Adjust-Tru Plain Back |
|
|
1695.00 |
|
IS12B-265 |
 |
 |
8-1/4" Howa 3-Jaw Power Lathe Chuck,
Plain Back
Stock Number: 012B-265
Model: No. 608191 8-1/14" Plain
| Specification |
Description |
| Two Piece Serrated Jaws with
Soft Top Jaws |
|
| Chuck Body: |
4" Thick |
| Plain Back |
|
| |
|
| Net Weight: |
62 lbs. |
|
$810.00 |
|
IS12B-292 |
 |
 |
12" Cushman 4-Jaw Power Lathe Chuck
Stock Number: 012B-292
Model: No. 91 536 12 201A
| Specification |
Description |
| Two Piece Tongue and Groove
Jaws without Top Jaws |
|
| |
|
| 2" x 12 Threads Per Inch
Actuating Rod |
|
| Steel Chuck: |
6-1/2" Thick |
| A-8 Back |
|
| |
|
| Net Weight: |
142 lbs. |
|
1282.50 |
|
IS12B-294 |
 |
 |
14" 3-Jaw Power Lathe Chuck
Stock Number: 012B-294
Model: No. TL- 127250- 11
| Specification |
Description |
| Two Piece Serrated Jaws with
Special Top Jaws |
|
| |
|
| 1-1/2" x 12 Threads Per Inch
Actuating Rod |
|
| Cast Chuck Body: |
4" Thick |
| (3) T-Slots: |
1/2" |
| Plain Back |
|
| |
|
| Net Weight: |
136 lbs. |
|
1012.50 |
|
IS12B-323 |
 |
 |
36" 3-Jaw Heavy Duty Power Chuck
Stock Number: 012B-323
Model: 36" 3-Jaw Power, Plain back
This chuck came off of a Bullard. It requires an actuator to
move the jaws in unison.
| Specification |
Description |
| Diameter of Chuck: |
36" |
| Number of Jaws: |
3 |
| Thickness of Chuck: |
7" |
| Slots for Jaws: |
1" T-Slot w/5/8" Slots |
| Number of Radial T-Slots: |
9 |
| Size of T-Slots: |
1" |
| Back: |
Plain |
| Net Weight: |
1,160 lbs. |
|
4347.00 |
|
IS12B-324 |
 |
 |
36" 3-Jaw Heavy Duty Power Chuck
Stock Number: 012B-324
Model: 36" 3-Jaw Power, Plain back
This chuck came off of a Bullard. It requires an actuator to
move the jaws in unison.
| Specification |
Description |
| Diameter of Chuck: |
36" |
| Number of Jaws: |
3 |
| Thickness of Chuck: |
7" |
| Slots for Jaws: |
1" T-Slot w/5/8" Slots |
| Number of Radial T-Slots: |
9 |
| Size of T-Slots: |
1" |
| Back: |
Plain |
| Net Weight: |
1,160 lbs. |
|
4347.00 |
|
IS12B-302 |
 |
 |
8-1/2" S-P MFG Co. 3-Jaw Power Lathe Chuck
Stock Number: 012B-302
Model: No. 8-SC-157
| Specification |
Description |
| Diameter of Chuck: |
36" |
| Number of Jaws: |
3 |
| Thickness of Chuck: |
7" |
| Slots for Jaws: |
1" T-Slot w/5/8" Slots |
| Number of Radial T-Slots: |
9 |
| Size of T-Slots: |
1" |
| Back: |
Plain |
| Net Weight: |
1,160 lbs. |
|
675.00 |
|
IS12B-313 |
 |
 |
ITW/Woodworth 8" Universal 3-Jaw Power Chuck
Stock Number: 012B-313
Model: No. 8" UBL-8002
Serial No. W.O.#13-125951
Universal ball-lok pull down compensating type
chuck. For both external & internal chucking.
The compensating features of this chuck allows the chuck jaws to
compensate for any eccentricity between the chucking diameter and
the datum diameter. The centralizing device is usually an arbor,
plug or center mounted on the face of the chuck. It then acts as the
centralizing device which establishes the axis of rotation for the
datum diameter in the work piece. The diameters being turned will
then be concentric to the datum diameter.
| Specification |
Description |
| Chuck Diameter: |
8" |
| Number of Jaws: |
3 |
| Width of Body: |
3-3/4" |
| Total Jaw Opening: |
.37" |
| Amount of Compensation: |
.060" |
| Maximum Draw-bar Pull: |
8000 Lbs. |
| Maximum Operating Speed: |
2500 RPM |
| Mounting Back: |
A-6" |
| Net Weight: |
45 lbs. |
|
2632.50 |
|
IS12B-314 |
 |
 |
ITW/Woodworth
8" Universal 3-Jaw Power Chuck
Stock Number: 012B-314
Model: No. 8" UBL-8002
Serial No. W.O.#13-125951
Universal ball-lok pull down compensating type chuck. For both
external & internal chucking.
The compensating features of this chuck allows the chuck jaws to
compensate for any eccentricity between the chucking diameter and
the datum diameter. The centralizing device is usually an arbor,
plug or center mounted on the face of the chuck. It then acts as the
centralizing device which establishes the axis of rotation for the
datum diameter in the work piece. The diameters being turned will
then be concentric to the datum diameter.
| Specification |
Description |
| Chuck Diameter: |
8" |
| Number of Jaws: |
3 |
| Width of Body: |
3-3/4" |
| Total Jaw Opening: |
.37" |
| Amount of Compensation: |
.060" |
| Maximum Draw-bar Pull: |
8000 Lbs. |
| Maximum Operating Speed: |
2500 RPM |
| Mounting Back: |
A2-6" |
| Net Weight: |
45 Lbs. |
|
1957.50 |
|
IS12B-312 |
 |
 |
ITW/Woodworth
8" Universal 3-Jaw Power Chuck
Stock Number: 012B-314
Model: No. 8" UBL-8002
Serial No. W.O.#13-125951
Universal ball-lok pull down compensating type chuck. For both
external & internal chucking.
The compensating features of this chuck allows the chuck jaws to
compensate for any eccentricity between the chucking diameter and
the datum diameter. The centralizing device is usually an arbor,
plug or center mounted on the face of the chuck. It then acts as the
centralizing device which establishes the axis of rotation for the
datum diameter in the work piece. The diameters being turned will
then be concentric to the datum diameter.
| Specification |
Description |
| Chuck Diameter: |
8" |
| Number of Jaws: |
3 |
| Width of Body: |
3-3/4" |
| Total Jaw Opening: |
.37" |
| Amount of Compensation: |
.060" |
| Maximum Draw-bar Pull: |
8000 Lbs. |
| Maximum Operating Speed: |
2500 RPM |
| Mounting Back: |
A2-6" |
| Net Weight: |
45 Lbs. |
|
2632.50 |
